The separation of the enantiomers of diquats by capillary electrophoresis using randomly sulfated cyclodextrins as chiral selectors.

Diquats, derivatives of the widely used herbicide diquat, represent a new class of functional organic molecules. A combination of their special electrochemical properties and axial chirality could potentially result in their important applications in supramolecular chemistry, chiral catalysis, and chiral analysis. However, prior to their practical applications, the diquats have to be prepared in enantiomerically pure forms and the enantiomeric purity of their P- and M-isomers has to be checked. Hence, a chiral capillary electrophoresis (CE) method has been developed and applied for separation of P- and M-enantiomers of 11 new diquats. Fast and better than baseline CE separations of enantiomers of all 11 diquats within a short time 5-7 min were achieved using acidic buffer, 22 mM NaOH, 35 mM H3 PO4 , pH 2.5, as a background electrolyte, and 6 mM randomly sulfated α-, ß-, and γ-cyclodextrins as chiral selectors. The most successful selector was sulfated γ-cyclodextrin, which baseline separated the enantiomers of all 11 diquats, followed by sulfated ß-cyclodextrin and sulfated α-cyclodextrin, which baseline separated enantiomers of 10 and nine diquats, respectively. Using this method, a high enantiopurity degree of the isolated P- and M-enantiomers of three diquats with a defined absolute configuration was confirmed and their migration order was identified.

Covalent anionic copolymer coatings with tunable electroosmotic flow for optimization of capillary electrophoretic separations.

We present a method for finely adjustable electroosmotic flow (EOF) velocity in cathodic direction for the optimization of separations in capillary electrophoresis. To this end, we use surface modification of the separation fused silica capillary by the covalently attached copolymer of acrylamide (AM) and 2-acrylamido-2-methyl-1-propanesulfonate (AMPS), that is, poly(AM-co-AMPS) or PAMAMPS. Coatings were formed by the in-capillary polymerization of a mixture of the neutral AM and anionic AMPS monomers premixed in various ratios in order to control the charge density of the copolymer. EOF mobility varies in the 0 to ∼40 × 10-9  m2 V-1 s-1 interval for PAMAMPS coatings ranging from 0 to 60 mol.% of charged AMPS monomer. For EOF in PAMAMPS-treated capillaries, we observed (i) a negligible dependence on pH in the 2-10 interval, (ii) a minor variance among background electrolytes (BGEs) in function of their components and (iii) its standard decrease with increasing ionic strength of the BGE. Interest in variable cathodic EOF was demonstrated by the amelioration of separation of two kinds of isomeric anionic analytes, that is, monosaccharides phosphates and helquat enantiomers, in counter-EOF mode.

Sensitive monitoring of 3-hydroxybutyrate as an indicator of human fasting by capillary electrophoresis in a PAMAMPS coated capillary.

Sensitive electrophoretic determination of 3-hydroxybutyrate (3HB) as an indicator of human ketogenesis is performed in fused silica capillary covalently coated by an anionic copolymer of poly(acrylamide-co-sodium-2-acrylamido-2-methylpropanesulphonate) (PAMAMPS). Baseline separation of 3HB from other components of human serum is achieved in a 20 µm capillary with an effective length of 17 cm covered by 4% PAMAMPS, which generates a cathodic EOF with a mobility of 8.30 ± 0.00 · 10-9 m2/V.s in 80 mM MES/His as background electrolyte. 3HB migrates in counter-current electrophoretic mode against EOF, that effectively improving electrophoretic resolution. Sample pre-treatment is based on adding of 45 µL acetonitrile to 15 µL serum and, after shaking, a 28 mm long zone of supernatant is injected into the capillary, and sharpened after turning on a separation voltage of 20 kV using the technique of large volume sample stacking, where the EOF forces the residual acetonitrile from the capillary. When combined with universal contactless conductivity detection, the achieved LOD and LOQ are 0.43 µM and 1.44 µM, respectively, that are sufficiently low for monitoring the physiological 3HB level. The performed clinical study subsequently showed that serum 3HB increases from a concentration of 71 µM, corresponding to normal food, to level of 1924 µM after 60 h of fasting and returns to the normal physiological concentration 48 h after commencing consumption of high-saccharide food.

Covalent cationic copolymer coatings allowing tunable electroosmotic flow for optimization of capillary electrophoretic separations.

Electroosmotic flow (EOF) plays a pivotal role in optimization of capillary electrophoresis (CE) separations of (bio)molecules and (bio)particles. EOF velocity is directly related to analysis time, peak resolution and separation efficiency. Here, we report a concept of charged polymer coatings of the inner fused silica capillary wall, which allows anodic EOF with mobility ranging from 0 to ∼(30-40) × 10-9 m2V-1s-1. The capillary wall is modified by covalently bound cationic copolymer poly(acrylamide-co-(3-acrylamidopropyl)trimethylammonium chloride) (PAMAPTAC) containing variable ratio of the charged monomer in the 0-60 mol. % interval. The EOF mobility showed minor variability with composition of background electrolyte (BGE) and pH in the 2-10 interval. The coatings were evaluated by CE-UV and nanospray CE-MS in the counter-EOF arrangement for a series of basic drug molecules in acetic acid based acidic BGE. Tunable EOF velocity was demonstrated as a useful tool for optimization of peak resolution, separation efficiency and migration time of analytes. Electrostatic repulsion of positively charged capillary surface was shown as beneficial for suppression of analyte adsorption, notably for hydrophobic cationic analytes.

Electrophoretic Determination of Symmetric and Asymmetric Dimethylarginine in Human Blood Plasma with Whole Capillary Sample Injection.

Asymmetric and symmetric dimethylarginines are toxic non-coded amino acids. They are formed by post-translational modifications and play multifunctional roles in some human diseases. Their determination in human blood plasma is performed using capillary electrophoresis with contactless conductivity detection. The separations are performed in a capillary covered with covalently bonded PAMAPTAC polymer, which generates anionic electroosmotic flow and the separation takes place in the counter-current regime. The background electrolyte is a 750 mM aqueous solution of acetic acid with pH 2.45. The plasma samples for analysis are treated by the addition of acetonitrile and injected into the capillary in a large volume, reaching 94.5% of the total volume of the capillary, and subsequently subjected to electrophoretic stacking. The attained LODs are 16 nm for ADMA and 22 nM for SDMA. The electrophoretic resolution of both isomers has a value of 5.3. The developed method is sufficiently sensitive for the determination of plasmatic levels of ADMA and SDMA. The determination does not require derivatization and the individual steps in the electrophoretic stacking are fully automated. The determined plasmatic levels for healthy individuals vary in the range 0.36-0.62 µM for ADMA and 0.32-0.70 µM for SDMA.

Investigating the position of the separation capillary and emitter tube tips in a nanoflow sheath-liquid CE-ESI-MS interface to decouple the ESI potential.

Robust decoupling of the ESI potential from the separation potential in CE-ESI-MS interfaces is very important for the high performance of the CE-ESI-MS devices and their applications for highly sensitive analyses of ionogenic compounds. In this study, we utilize a nanoflow sheath-liquid CE-ESI-MS interface composed of a quartz emitter and a separation fused silica capillary treated by etching, which are threaded to cross coupling for sheath liquid and electrode connection. Specifically, we have tested the ability of the interface to decouple the ESI potential from the separation potential at different positions of the separation capillary and ESI emitter tube tips. The interface with the separation capillary tip protruding the emitter tip by 20 µm did not provide sufficient robustness. The real ESI potential (delivered as 2.0 kV from the independent high voltage power supply HV2) ranged from 2.1 kV to 4.5 kV depending on the applied separation voltage (12.0-20.0 kV, provided by the power supply HV1) and electric conductivity of the background electrolyte (BGE) used. The interface robustness was partially improved when the capillary tip was aligned with the emitter tip. However, the complete decoupling of the spray and separation potentials was achieved only when the capillary tip was retracted 20 µm inside the emitter. In this arrangement, the ESI potential was stable and independent of both the separation potential (voltage) and the BGE conductivity. Moreover, this setting provided better sensitivity for the CE-ESI-MS analysis of selected drugs and benzylpyridinium cations than the setup with the capillary tip aligned with or protruding the emitter tip.

Large volume sample stacking of antiepileptic drugs in counter current electrophoresis performed in PAMAPTAC coated capillary.

Electrophoretic stacking is developed for sensitive determination of three zwitterionic antiepileptics, namely vigabatrin, pregabalin and gabapentin, in human serum. CE separation is performed in a 25 µm fused silica capillary covalently coated with the copolymer of acrylamide with 5% content of permanently charged 3-acrylamidopropyl trimethylammonium chloride (PAMAPTAC). In background electrolyte of 500 mM acetic acid, the 5% PAMAPTAC generates an anodic electro-osmotic flow with a magnitude of (-18.6 ± 0.5) · 10-9 m2V-1s-1, which acts against the direction of the electrophoretic migration of the analytes. A sample of the antiepileptic prepared in a 25% v/v infusion solution and 75% v/v acetonitrile is injected into the capillary in a large volume attaining a zone length of up to 270 mm. After turning on the separation voltage, the antiepileptics are isotachophoretically focussed behind the zone of Na+ ions with a sensitivity enhancement factor of 78. For the clinical determination of antiepileptics, the human serum is diluted with acetonitrile in a ratio of 1:3 v/v and a zone with a length of 90 mm is injected into the capillary. The method is linear in the 0.025-2.5 µg/mL concentration range; the attained limit of quantification is in the range 18.3-22.8 nmol/L; the within-day precision for the migration time is 0.8-1.2% and for the peak area 1.5-2.4%.

Separation of anaesthetic ketamine and its derivates in PAMAPTAC coated capillaries with tuneable counter-current electroosmotic flow.

Capillary electrophoretic separation of ketamine, norketamine, hydroxynorketamine, and dehydronorketamine was performed in the counter-current regime under the influence of oppositely-directed electroosmotic flow. For this purpose, the fused silica capillaries were covalently coated with the poly(acrylamide-co-3-acrylamidopropyl trimethylammonium chloride) copolymer (PAMAPTAC). The content of the cationic monomer APTAC in the polymerization mixture varied in the range 0-6 mol. % and the generated electroosmotic flow increased continuously in the 0-20 · 10-9 m2V-1s-1 interval. Importantly, it resulted in improved electrophoretic resolution of ketamine/norketamine, which increased from 0.8 for neutral PAM coating (i.e. 0% PAMAPTAC) to 3.0 for 6% PAMAPTAC. The determination of ketamine and its derivates in rat serum was performed in a 4% PAMAPTAC capillary with an inner diameter of 25 µm. The separation was performed in a 500 mM aqueous solution of acetic acid (pH 2.3). The clinical sample was deproteinized by the addition of acetonitrile to the serum and a large volume of the treated sample was injected directly into the capillary. The achieved limit of detection ranged from 2.2 ng/mL for dehydronorketamine to 4.1 ng/mL for hydroxynorketamine; the intra-day repeatability was 1.0-1.5% for the migration time and 2.8-3.3% for the peak area. The developed methodology was employed for time monitoring of ketamines in rat serum after intra venous administration of low doses of anaesthetic at a level of 2 µg per g of body weight.

Determination of binding constants of multiple charged cyclodextrin complexes by ACE using uncorrected and ionic strength corrected actual mobilities of the species involved.

In this study, the apparent binding constants and limiting mobilities of the multiply charged complexes of the Δ- and Λ-enantiomers of Ru(II)- and Fe(II)-polypyridyl associates ([Ru(2,2'-bipyridine)3 ]2+ , [Ru(1,10-phenanthroline)3 ]2+ , and [Fe(1,10-phenanthroline)3 ]2+ ) with single-isomer 2,3-diacetylated-6-sulfated-cyclodextrins (CDs) (12Ac-6S-α-CD, 14Ac-7S-ß-CD, and 16Ac-8S-γ-CD) were determined by ACE using uncorrected and ionic strength corrected actual mobilities of the species involved. Two limiting models were tested for the ionic strength correction of the actual mobilities based on an empirical relation for the ionic strength correction of multivalent ionic species. In model 1, the nominal values of the charge numbers (zS,nom ) and analytical concentrations (cS,nom ) of the above CD selectors in the BGEs were applied for calculation of the BGE ionic strength, as usual. In model 2, the CD selectors were considered as singly charged species (zS  = -1) with |zS,nom |-times higher concentrations in the BGE than their analytical concentrations (cS  = |zS,nom | × cS,nom ) in the calculation of the BGE ionic strength. In all three cases-with uncorrected actual mobilities as well as with actual mobilities corrected according to the two limiting models-the measured effective mobilities of the above enantiomers fit well the theoretical curves of their mobility dependences on the CD selectors concentrations in the BGE, with high average coefficients of determination (R2  = 0.9890-0.9995). Nevertheless, the best physico-chemically meaningful values of the apparent binding constants and the limiting mobilities of the enantiomer-CDs complexes with low RSDs were obtained using the actual mobilities of the species involved corrected according to model 2.

Comparison of two low flow interfaces for measurement of mobilities and stability constants by affinity capillary electrophoresis-mass spectrometry.

Affinity capillary electrophoresis (ACE) is typically used for the determination of stability constant, Kst, of weak to moderately strong complexes. Sensitive detection such as mass spectrometry (MS) is required for extension of ACE methodology for estimation of Kst of stronger complexes. Consequently, an efficient interface for hyphenation of CE with MS detection is necessary. For evaluation of interfaces for electrospray ionization mass spectrometric (ESI/MS) detection in ACE conditions, potassium-crown ether complexation was used as model system. The effective mobilities of the crown ether ligands and the Kst of their potassium complexes were measured/determined by ACE-ESI/MS using two lab-made interfaces: (i) a sheathless porous tip CE-ESI/MS interface and (ii) a nano-sheath liquid flow CE-ESI/MS interface, and, in turn, compared with those obtained by ACE with UV spectrophotometric detection. Apparent stability constant of potassium-crown ether complexes in 60/40 (v/v) methanol/water mixed solvent, pH* 5.5, was about 1300 L/mol for dibenzo-18-crown-6, 1600 L/mol for benzo-18-crown-6 and 5200 L/mol for 18-crown-6 ligands, respectively. It was observed that electrophoretic mobilities from CE-MS experiments differ from reference values determined by UV detection by ∼7% depending on the CE-MS interface used. Good agreement of CE-MS and CE-UV data was achieved for nano-sheath liquid flow interface, in which the spray potential and the CE separation potential can be effectively decoupled. As for sheathless porous tip interface, a correction procedure involving a mobility marker has been proposed. It provides typically only ca. 1% difference of effective mobilities and Kst values obtained from CE-MS data as compared to those received by the reference ACE-UV method.

Diquats with Robust Chirality: Facile Resolution, Synthesis of Chiral Dyes, and Application as Selectors in Chiral Analysis.

Diquats with extremely high racemization barriers with ΔG≠theor of 233 kJ mol-1 at 180 °C are described. Reported configurational robustness is due to a combination of two structural features: the rigid o-xylylene tether connecting the nitrogen atoms and the presence of two substituents in the bay region of the bipyridinium scaffold. The straightforward synthesis of diquats, plus facile resolution and derivatization make them attractive for chiral application studies. This is demonstrated by: 1) synthesis of the first non-racemic diquat dyes with pronounced chiroptical properties, and 2) capability of diquats to interact stereospecifically with chiral molecules. This suggests potential for diquat derivatives to be used as chiral selectors in separation methods.

Electrophoretic large volume sample stacking for sensitive determination of the anti-microbial agent pentamidine in rat plasma for pharmacological studies.

A sensitive capillary electrophoretic method with on-line sample preconcentration by large volume sample stacking has been developed for determination of the anti-microbial agent pentamidine. The separation is performed in a fused silica capillary coated with covalently bound hydroxypropyl cellulose, with an internal diameter of 50 µm and length of 31.5 cm; the background electrolyte was 100 mM acetic acid/Tris at pH 4.7. The stacking is tested using a model sample of 1 µM pentamidine dissolved in 25% infusion solution and 75% acidified acetonitrile. Stacking permits the injection of a sample zone with a length of 95% of the total capillary length to achieve an enhancing factor of 77 compared to low injection into 1.8% of the total capillary length, with simultaneous high separation efficiency of approximately 1 350 000 plates/m. Stacking is based on simultaneous application of a separation field and a hydrodynamic pressure to force the acetonitrile zone out of the capillary. This approach allows the determination of pentamidine in rat blood plasma using only 12.5 µL of plasma treated by the addition of acetonitrile in a ratio of 1:3 v/v. The attained LOD is 0.03 µM and the intra-day repeatability is 0.1% for the migration time and 1.0% for the peak area at the injection 28.3% of capillary length. The performed pharmacokinetic study with ten-second scanning of the blood reveals rapid dynamics of pentamidine in the arterial bloodstream, while the changes are much slower in the venous system.

Dutch Resolution of a configurationally stable [5]helquat.

Synthesis and nontrivial optical resolution of a helicene-like dication, helquat 1, has been accomplished. Starting with gram scale of the racemic helquat 1 sample, Dutch Resolution using family of 3 tartrate anions was key to achieve successful separation of M and P helical enantiomers of 1. Hundreds of milligrams of each enantiomer of this configurationally stable C2 -symmetric helquat have been obtained. Racemization barrier of 1 has been determined. To our knowledge this is the first report on Dutch Resolution performed with a helicene-like compound. Moreover, there are no literature precedents for Dutch Resolution of chiral quaternary ammonium cations.

Chiral analysis of α-diimine Ru(II) and Fe(II) complexes by capillary electrophoresis using sulfated cyclodextrins as stereoselectors.

CE using randomly highly sulfated α-, ß-, and γ-CDs (S-α-CD, S-ß-CD, S-γ-CD), sulfobutylether-ß-CD (SBE-ß-CD), single isomer (6-O-sulfo) α-, ß-, and γ-CDs, and their derivatives as stereoselectors was applied to chiral analysis of polypyridyl complexes of [Ru(bpy)3 ]2+ , [Ru(phen)3 ]2+ , and [Fe(phen)3 ]2+ (bpy = 2,2'-bipyridine; phen = 1,10 phenanthroline). The best separations of Δ- and Λ-enantiomers of the these complexes with high resolution (up to R1,2  = 7.0) and short analysis times (10-20 min) were achieved in the BGE composed of 22 mM NaOH/35 mM H3 PO4 , pH 2.4, containing 1.5-6.0 mM S-α-CD or S-ß-CD, or SBE-ß-CD as chiral selectors. The developed method was applied to the assessment of enantiomeric purity of several samples of [Ru(bpy)3 ]2+ catalyst. CE experiments were performed in a homemade analyzer equipped with bare or hydroxypropylcellulose-coated fused-silica capillaries (total/effective length 40/29 cm, id/od 50/375 µm) and an UV absorption detector operating at 206 nm. In addition to chiral analysis, apparent binding constants of the complexes of [Ru(bpy)3 ]2+ , [Ru(phen)3 ]2+ , and [Fe(phen)3 ]2+ enantiomers with five sulfated CDs (S-α-CD, S-ß-CD, S-γ-CD, SBE-ß-CD, and 16Me-8S-γ-CD) were determined from the dependence of their effective electrophoretic mobilities on the concentration of the CDs in the BGE by nonlinear regression analysis. Calculated apparent binding constants of these complexes were found to be in the (1.10-4.66) × 103  L/mol range. Moreover, it was shown that at selected concentrations of some S-CDs and suppressed or very low electroosmotic flow, the exceptional enantioseparations with infinite resolution could be achieved.

Interactions of helquats with chiral acidic aromatic analytes investigated by partial-filling affinity capillary electrophoresis.

Noncovalent molecular interactions between helquats, a new class of dicationic helical extended diquats, and several chiral acidic aromatic drugs and catalysts have been investigated using partial-filling affinity capillary electrophoresis (PF-ACE). Helquats dissolved at 1mM concentration in the aqueous background electrolyte (40mM Tris, 20mM acetic acid, pH 8.1) were introduced as ligand zones of variable length (0-130mm) into the hydroxypropylcellulose coated fused silica capillary whereas 0.1mM solutions of negatively charged chiral drugs or catalysts (warfarin, ibuprofen, mandelic acid, etodolac, binaphthyl phosphate and 11 other acidic aromatic compounds) were applied as a short analyte zone at the injection capillary end. After application of electric field, analyte and ligand migrated against each other and in case of their interactions, migration time of the analyte was increasing with increasing length of the ligand zone. From the tested compounds, only isomers of those exhibiting helical chirality and/or possessing conjugated aromatic systems were enantioselectively separated through their differential interactions with helquats. Some compounds with conjugated aromatic groups interacted with helquats moderately strongly but non-enantiospecifically. Small compounds with single benzene ring exhibited no or very weak non-enantiospecific interactions. PF-ACE method allowed to determine binding constants of the analyte-helquat complexes from the changes of migration times of the analytes. Binding constants of the weakest complexes of the analytes with helquats were less than 50L/mol, whereas binding constants of the strongest complexes were in the range 1 000-1 400L/mol.

Linquats: Synthesis, Characterization, and Properties of Linear Extended Diquats.

We report an innovative synthetic route to linear extended diquats (linquats). Our approach is short and efficient and features a highly modular reaction sequence based on two-fold quaternization followed by the key intramolecular [2+2+2] alkyne cycloaddition. The physico-chemical properties of four new linquats were characterized by spectroscopic methods, X-ray crystallography, and electrochemistry complemented by information obtained from DFT calculations. Electron deficient N-heteroaromatic cations with linear extended diquat motif with high electron affinities have been recently recognized as attractive n-type semiconductors for chemical and biological sensing. Their advantageous redox properties such as very fast reversible electron transfers make the title compounds interesting for applications.

Intense chirality induction in nitrile solvents by a helquat dye monitored by near resonance Raman scattering.

Chirality induction phenomena attract attention because of their relevance to intermolecular interactions encountered in living matter. Usually, such effects are weak. However, enantiomers of a [6]helquat dye were found to induce exceptionally strong chirality in several achiral solvents containing nitrile groups. This effect was observable as an intense Raman optical activity (ROA) induced in acetonitrile, acetonitrile-d3, and liquid hydrogen cyanide solvents. The observation was verified by measurement of both helquat enantiomers which provided mirror image ROA spectra. Theoretical analysis indicated that the 532 nm laser excitation light was in a near resonance with electronic transitions of the dye, which made the effect observable in very dilute solutions (1 : 200 000 helquat to nitrile ratio) and thus the phenomenon can be generally useful in analytical chemistry.

Single-Crystal-to-Single-Crystal Transition in an Enantiopure [7]Helquat Salt: The First Observation of a Reversible Phase Transition in a Helicene-Like Compound.

Here it is reported that crystals of an enantiopure [7]helquat salt undergo reversible thermal solid-solid phase transition at 404 K. Differential scanning calorimetry (DSC), capillary electrophoresis (CE), and X-ray diffraction analysis were used to unravel the mechanistic details of this process. The single-crystal-to-single-crystal course enabled direct monitoring of the structural changes by in situ variable-temperature X-ray diffraction, thus providing the first direct evidence of a solid phase transition in a helicene-like compound.

Functional helquats: helical cationic dyes with marked, switchable chiroptical properties in the visible region.

Helquat dyes are the first helicene-like cationic styryl dyes obtained as separate enantiomers. Their remarkable chiroptical properties are due to the unique combination of a cationic hemicyanine chromophore and a helicene-like motif. The magnitude of the ECD response and the pH switching along with their positioning in the visible region are unprecedented among helicenoids.

Generalized polymer effective charge measurement by capillary isotachophoresis.

In this work, we have generalized the use of capillary isotachophoresis as a universal method for determination of effective charge of anionic and cationic (co)polymers on ordinary capillary electrophoresis instruments. This method is applicable to a broad range of strong or weak polyelectrolytes with good repeatability. Experimental parameters (components and concentrations of leading and terminating electrolytes, capillary diameters, constant electric current intensity) were optimized for implementation in 100 µm i.d. capillaries for both polyanions and polycations. Determined values of polymer effective charge were in a very good agreement with those obtained by capillary electrophoresis with indirect UV detection. Uncertainty of the effective charge measurement using isotachophoresis was addressed and estimated to be ∼5-10% for solutes with mobilities in the 20-50 × 10(-9)m(2)V(-1)s(-1) range.